Bureau of Energy Efficiency
Mr. Abhay Bakre, Director General
Mr. Saurabh Diddi, Director
Ms. Akanksha Krishan, Sector Expert
Ms. Anju Singh, Project Engineer
Ms. Meenal Anand, Sector Expert
Ms. Shatakshi Suman, Sector Expert
Mr. Vineet Mall, Sector Expert
Ms. Meenakshi, Project Engineer
Mr. Pankaj Sharma, Project Engineer
Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ)
Mr. S. Vikash Ranjan, Project Manager
Mr. Govinda Somani, Technical Expert
Mr. Abdullah Nisar Siddqui, Technical Expert
Ms. Snigdha Devi, Technical Consultant
Legal Team
Mr. Vedant Pujari, Accures Legal
Ar. Jatinder Kaur, School of Planning & Architecture
Code Development Team
Bureau of Energy Efficiency
V
3 UNlocking NATional Energy-Efficiency potential (UNNATEE), Bureau of Energy Efficiency, Ministry of Power 4 UNlocking NATional Energy-Efficiency potential (UNNATEE), Bureau of Energy Efficiency, Ministry of Power
Introduction
1.1 India’s aim is to reduce the emissions intensity of its gross domestic product (GDP) by 33 to 35 percent by 2030 from 2005 level. Any effort to achieve this target is contingent upon the increase in efficiency of energy use across all sectors, especially in the building sector. The building sector in India consumes over 30% of the total electricity consumed in the country annually and is second only to the industrial sector.
1.2 As per Energy Statistics 2020 released by Ministry of Statistics and Programme Implementation (MoSPI), total energy demand by various sectors for FY 2018–19 is about 569.5 Mtoe1, out of which residential (domestic) sector consumes about 52.04 Mtoe, which is 9.1% of total primary energy consumption.
1.3 The total electricity demand for FY 2018–19 is about 1158 Billion Units (BU)2. Domestic sector consumes about 280 Billion Units which is about 24.2% of total electricity consumption. The energy demand in the domestic sector has been on the rise since the late 2000s, with increasing demand for appliance ownership, especially of fans and televisions in urban and rural areas, and an increase in refrigerators and air conditioners in urban areas. Electricity consumption increased from 146 BU in 2009-10 to 280 BU in 2018-19 with CAGR of 6.74%.
1.4 It is estimated that, domestic sector will consume about 769 TWh3 of electricity and 98.6 Million toe 4of energy in 2031. Out of the total electricity consumed in the building sector, about 70% is consumed in the residential buildings.
1.5 According to India Cooling Action Plan, approximately 8% of the current households have room air conditioners. This is anticipated to rise to 21% and 40% in 2027-28 and 2037-38 respectively. The demand for air-conditioning will continue its exponential growth with improvement in household incomes and will become the dominant contributor of GHG emissions nation-wide owing to increased electricity consumption. This situation calls for an immediate energy conservation action plan.
1.6 Energy codes for new buildings are an important regulatory measure for ushering energy efficiency in the building sector. Eco Niwas Samhita 2018 (Part-I: Building Envelope) was launched in 2018 to set minimum building envelope performance requirements to limit heat gains (for cooling dominated climates) and to limit heat loss (for heating dominated climates), as well as for ensuring adequate natural ventilation and daylighting potential.
1.7 The Eco Niwas Samhita 2021 (Code Compliance and Part-II: Electro-Mechanical and Renewable Energy Systems) is a code specifying code compliance approaches and minimum energy performance requirements for building services, indoor electrical end-use and renewable energy system.
Introduction
1 Energy Statistics 2020, Ministry of Statistics and Programme implementation
2 Energy Statistics 2020, Ministry of Statistics and Programme implementation
Bureau of Energy Efficiency
Introduction
1.8 The code also provides following five appendices which are recommendatory in nature and envisaged to be added in future revision of the code.
Annex A: Annualized embodied energy
Annex B: Better construction practices
Annex C: Retrofitting of residential buildings
Annex D: Improved air cooling
Annex E: Smart Home
Bureau of Energy Efficiency
Scope
2.1 The purpose of Eco Niwas Samhita 2021 (Code Compliance and Part-II: Electro-Mechanical and Renewable Energy Systems) (hereinafter referred to as ‘ENS-C&2’ ) is for code compliance and to provide the minimum requirement(s) for building services, electro-mechanical and renewable energy systems for new residential buildings.
2.2 The code applies to –
2.2.1 Residential buildings built on a plot area5 of ≥ 5 0 0 ; m 2
2.2.2 Residential part of Mixed land-use building projects6, built on a plot area of ≥ 500 m2.
2.3 The code is also applicable for all additions made to existing residential buildings where the existing building exceeds the threshold defined in section 2.2 of the ENS-C&2. For this purpose, the addition together with the existing residential building is required to show compliance with ENS-C&2 with the authority having jurisdiction.
2.4 The code is also applicable for all alterations made to existing residential buildings where the existing building exceeds the threshold defined in section 2.2 of the ENS-C&2 and the alteration, part of the building or its system, is been done for an area more than 1000 square feet. For this purpose, the part of the building or its systems that are being altered is required to show compliance with ENS-C&2 with the authority having jurisdiction.
2.6 The code sets minimum requirement for all building envelope parameters as mentioned in Eco Niwas Samhita 2018 (Part I: Building Envelope).
2.7 The ENS-C&2 sets minimum requirements for electro-mechanical systems used in building services (i.e. common area and exterior lighting, elevators, pumps, basement ventilation, transformers, power distribution losses, power factor correction, electrical vehicle supply equipment etc.) and indoor electrical end-use (i.e. indoor lighting, comfort systems, service hot water etc.).
2.8 The ENS-C&2 sets minimum requirements for renewable energy systems (Solar hot water requirements and Solar Photovoltaic) integration.
2.8 If a building project has more than one building block in multiple orientations, then compliance must be sought by showing that building block meet the performance requirements in each of the four-cardinal orientation (north, south, east, west). However, for identical building blocks with the same orientation, the compliance must be shown for one building block.
Scope
5 States and municipal bodies may change the plot area based on the prevalence in their area of jurisdiction.
6 However, residential accommodation in a building, where the carpet area of the residential part is not more than 30 m2 for caretakers or persons employed in connection with the building, is exempted.
Bureau of Energy Efficiency
Scope
2.9 The following codes, programs, and policies will take precedence over the code in case of conflict:
2.9.1 Any policy notified as taking precedence over this Code, or any other rules on safety, security, health, or environment by Central, State, or Local Government.
2.9.2 BEE’s Standards and Labelling for appliances and Star Rating Program for buildings, or any reference standard prescribed by the Code, provided both or either are more stringent than the requirements of this Code.
Bureau of Energy Efficiency

