2.1 For the purpose of this Section, the following definitions shall apply.
2.1.1 Appliance Valve — A device that will shut-off the gas supply to the burner(s).
2.1.2 Authority Having Jurisdiction — The Authority which has been created by a statute and which, for the purpose of administering the Code/Part, may authorize a committee or an official to act on its behalf; hereinafter called the ‘Authority’.
2.1.3 Customer’s/Consumer’s Connection — Piping tapped on riser to supply each individual customer/ consumer.
2.1.4 Gas Fitter — An employee of the gas supplying organization.
2.1.5 Pilot — A small flame which is utilized to ignite the gas at the main burner(s).
2.1.6 Pressure Regulator — A device designed to lower the pressure of gas coming from the distribution main and to maintain it practically constants downstream. This normal operation pressure shall be practically in all cases that of the gas appliances used.
2.1.7 Purge — To free a gas conduit of air or gas or a mixture of gas and air.
2.1.8 Qualified Installing Agency — An individual, firm or agency which either in person or through a representative is engaged in and is responsible for the installation or replacement of gas piping on the outlet side of the gas meter, or the connection, installation or repair of gas supply piping and appliances within a building, and who is experienced in such work, familiar with all precautions required, and who has complied with all the requirements as to qualification, registration, licensing, etc, of the Authority.
2.1.9 Riser — Piping usually vertical on most of its length that supplies gas from the service to the various storeys of the building.
2.1.10 Service Pipe — Pipe that runs between the distribution main in the street and the riser in the case of multi-storeyed building or the meter in the case of an individual house.
2.1.11 Service Shut-Off Valve (Isolation Valve)
A device installed outside the premises to cut-off the main supply of gas from pipeline by the supplier.
2.1.12 Vent Pipe — A safety device to which certain regulators are connected to evacuate outside gas that may escape from the normal circuit when some part of system gets damaged or malfunctions or a safety valve is open.