| 7 | Landings level of car with respect to landing sill at all landing for up and down direction. | The car shall stop exactly at landing level, The car shall stop at landing level within the specified limits. | a | The car stops at level/□above landing level/below landing level.the car stops within the specified limit of the landing levelthe car does not stop within the specified limits of the landing level | |
| 8 | Experience of jerk in the car at the time of starting or stopping. | No appreciable jerk shall be noticed at the time of starting. | a.b. | Appreciable jerk is not noticedNoticed at the time of starting/stopping. | |
| 9 | Operation of stop button/switch (Push button type only) | On pressing the stop button/switch the lift shall stop. | a.b. | Stop button/switch is tested and found OK.Not foundOK. | |
| 10 | In case of manually operated car door, open the car door while the lift is moving. | On opening the car door, lift shall stop. | a.b. | Lift stopsLift continues to move | |
| 11 | In case of power operated car door, while lift is moving, operate the "DOOR OPEN" button. | The car door shall not open. | a.b. | The car door opens/does not open. | |
| 12 | In case of power operated car door, and landing doors when they are about to close at landing operate the "DOOR OPEN" button. | the doors shall open. | a.b. | The doors open/do not open. | |
| 13 | In case of power operated car door, and landing doors when they are about to close at landings, place a round object of a normal finger size in the air gap & actuate door safety mechanism. | the doors shall open. | a.b. | The doors open/tend to close. | |
| 14 | While inside the car and control is on attendant mode, operate landing side call button. | The lift shall not respond to calls.The lift shall respond to calls as per type of control. | a.b. | The lift responds to call /does not respond to calls. | |
| 15 | Put the control in an automatic mode, enter the lift car, manually close the landing door and the car door. | The lift shall not operate for four to six seconds after arrival of car at that landing | a.b. | The lift door remains openfor......sec.The lift opertes instantly | |
| 16 | In case of power operated car doors, while lift is moving, is the floor position correctly displayed? | The floor position shall be correctly displayed. | a.b. | The floor position is correctly displayed/is not correctly displayed. | |
| 17 | In case of manually operated doors reverse the order of closing the doors by closing the car door and not closing landing door. Operate the floor button from inside the car or from landing side. | The lift shall not operate. | a.b. | The lift operates /does not operate | |
| 18 | In case of goods lifts, when the lift halts, either above or below the landing level say by about ±180mm, operate the inching device if provided. | The lift shall come to landing level. | a.b. | The lift comes to landing level.The lift does not come to landing level. | |
| Inspection Made From Top of The LIPT CAR Table-3 | Inspection Made From Top of The LIPT CAR Table-3 | Inspection Made From Top of The LIPT CAR Table-3 | Inspection Made From Top of The LIPT CAR Table-3 | Inspection Made From Top of The LIPT CAR Table-3 | |
| Sr.No. | DESCRIPTION | REQUIREMENT | REQUIREMENT | ACTUALLY PREVAILENT AT THE TIME OF INSPECTION | REMARKS |
| 1 | Testing of maintenance switch in "UP" and "DOWN" DIRECTION. | When maintenance switch is in "ON" position, the calls from the landings shall not get registered when the car traveling in either direction. | a.b. | Tested and found OK/Not found OK | |
| 2 | Operation of lever of landing gates locks I.e. pressing the lever from the car top.during travel as "UP" or "DOWN" direction. | The lift shall halt / stop if the gate locks are of such design that the electrical alarum gets open circuited on pressing of lever. | a.b. | Lift, haltsdoes not halt. | |
| | | | | |
| 3 | Condition of Hoistway | Hoistway shall be maintained in clean condition. | a.b. | Hoistway is clean and needs no repair/requires plastering or repairs. | |
| 4 | Observe whether the retiring cam comes in contact with the lever of landing gate locks. | Retiring cam shall not come in contact with the lever of gate locks while the lift is in motion. | a.b. | Retiring cam comes in contact/does not come in contact, with the lever of gate locks. | |
| 5 | Condition of car guide shoe liners | The guide shoe liners shall be in good condition and there shall not be any play.The guide shoe liners shall be in good condition and there may be reasonable play,but it shall not be so much as to cause the shoeto jump the rails under any condition. | a. | The guide shoe liners are in good conditionsnot in good condition. | |
| 6 | Condition of counter weight guide shoe liners. | The guide shoe liners shall be in good condition and there shall not be any play.The guide shoe liners shall be In good condition and there may be reasonable play,but it shall not be so much as to cause the shoeto jump the rails under any condition. | a.b. | The guide shoe liners are in good conditionsnot in good condition. | |
| 7 | Condition of midway junction box. | The wiring shall be properly terminated in midway junction box where installed. | a.b. | Wiring terminated neatly/needs adequate termination. | |
| 8 | Condition of trailing cable. | The trailing cable shall be in good condition I.e. the insulation shall not get frayed or damaged mechanically. | a.b. | The trailing cable is in good condition and insulation is not frayed/not in good condition.and insulation is frayed. | |
| 9 | Condition of floor gangway switches on car top | Gang switch shall be in good working condition | a.b. | Gang switch is in good condition/not in good condition. | |
| 10 | Operation of safety switch on car top. | On operation of safety switch the car shall stop. | a.b. | The car stops/does not stop. | |
| 11 | Condition of car top. | The car top shall be in good and strong condition. | a.b. | The car top is in good conditon not in good condition. | |
| 12 | Lubrication of car and counter weight guides. (Roller guide shoes do not require lubrication of rails) | The guides shall be in properly lubricated condition | a.b. | The guides are in properly lubricated condition.The guides are not in properly lubricated condition. | |
| 13 | Condition of gathering clips, rope fastening of suspension ropes near counterweight and near car top. | The suspension rope shall be adequately held by means of gathering clips. | a.b. | The suspension ropes are properlyheld by gathering clips not properly held by | |
| | | | | |
| | The suspension rope shall be adequately fastened. | c.d. | gethering clips.The suspension ropes are properly fastened not properly fastened. | |
| 14 | Earthing of landing gate locks, gang switches etc. | Earthing shall be satisfactorily done. | a.b. | Earthing is efficiently done not efficiently done. | |
| 15 | Termination of suspension ropes of car and counterweight | The termination shall be firm and with proper clips | a.b. | Termination is proper/not proper. | |
| 16 | Condition of compensatory link chain/rope. | It shall be in good working condition whenever provided. | a.b. | Linkchain/rope is in good condition not in good condition. | |