-
Short title and commencement :- These Rules may be called the Gujarat Lifts and Escalators Rules, 2001.
-
Definitions :- (1) In these rules, unless the context otherwise requires:-
(a) "Act" means the Gujarat Lifts and Escalators Act, 2000;
(b)"Annexure" means an annexure appended to these rules;
(c)"automatic control" means a method of operation by which a momentary pressure on a push button sets the car in motion and causes it to stop automatically at any required lift landing;
(d)"bottom car clearance" means the clear vertical distance from the pit floor to the lowest structural or mechanical part, equipment or device installed beneath the car platform, except the girders, shoes, rollers, safety jaw blocks and platform aprons or guards located within three hundred
ers, safety jaw blocks and platform aprons of guards located in millimeters, measured horizontally from the side of the car platform when the car rests on its fully compressed buffers;
(e)"bottom car runby" means the distance between the car buffer striker plate and the striking surface of the car buffer when the car is in level with the bottom terminal landing;
(f)"bottom Counterweight runby" means the distance between the counterweight buffer striker plate and the striking surface of the counterweight buffer when the car floor is in level within the top terminal landing;
(g)"bottom over-travel" means the distance provided for the car floor to travel below the level of the bottom lift landing when the lift car is stopped by the normal terminal stopping device;
(h)"buffer" means a device designed to stop a descending car or counter weight beyond its normal limit of travel by storing or by absorbing and dissipating the kinetic energy of the car or counterweight;
(i)"call Indicator" means a visual and audible device in the car to indicate to the attendant the lift landings from which calls have been made;
(j)"car apron" or "landing apron" means a protective screen attached to the under-side of the car platform or lift landing as the case may be, to prevent an object from being trapped between the car platform and the lift landing;
(k)"car-door electric contact" means an electric device the function of which is to prevent operation of the driving machine by the normal operating device unless the car door is in the closed position;
(1) "car body work" means the enclosing body work of the lift car which comprises the sides and roof and is built upon the car platform;
407301967
(m)"car frame" means the supporting frame or sling to which the platform of the lift car, its-safety gear, guide shoes and suspension ropes are attached.
(n) "car platform" means the part of the car which forms the floor and directly supports the load;
(o)"car switch control" means a method of control whereby the movement on the lift-car is directly under the lift operator by means of a switch in the lift car;
(p)"control" means the system governing starting, stopping direction of motion, acceleration, speed and retardation of moving member;
(q)"collective control" means automatic operation by which calls made by pressing push buttons in the car and at lift landings are registered and answered by the door stopping in floor sequence at each lift landing for which calls have been registered, irrespective of the order in which the calls have been made and until all calls have had attention;
(r) "counter weight" means a weight or series of weights to counter-balance the weight of the lift car and part of the rated load;
(s) "deflector sheave" means an idler pulley used to change the angle or the direction of a rope lead;
(t)" door -center opening sliding " means a door which slides horizontally and consists of two or more panels which open from the center and are usually so interconnected that they move simultaneously;
(u) "door -imperforated" means a door which is not having any perforations other than those required for vision panel of maximum size 100 Square centimeter.
(v) "door -single slide" means a single panel door which slides horizontally.
(w) "door -two speed sliding" means a door which slides horizontally and consists of two panels, one of which moves at twice the speed of the other.
(x) "door- vertical biparting" means a door which slides vertically and consists of two panels or sets of panels that move away from each other to open and are so inter connected that they move simultaneously; (y) "door- vertical lifting" means a single panel door which slides in the same plane vertically up to open;
(z) "door-swing" means a swinging type single panel door which is opened manually and closed by means of spring closer when released;
(ab) "door closer" means a device which automatically closes a manually opened door;
(ac) "door operator device" means a door operated device for opening and closing doors;
(ad). "earthed or connected with earth" means connected with the general mass of earth in such a manner as to ensure at all times an immediate discharge of energy without danger.
(ae)"electrical and mechanical Interlock" means an arrangement provided to control the operation of the car;
(af) "electro-mechanical lock" means a device which combines in one unit, electrical and mechanical interlock arrangement used jointly for the landing and /or car doors;
(ag) "emergency stop push or switch" means a push button or switch provided inside the car designed to open the control circuit to cause the hit car to stop during emergency;
(ah) "floor leveling switch" means a switch for bringing the car to level at slow speed in case of double speed or variable speed machines;
(ai) "floor-selector" means a mechanism forming a part of the control equipment, in certain automatic lift, designed to operate controls which cause the lift car to stop at the required landings;
(aj)"floor stopping switch" means a switch or combination of switches arranged to bring the car to rest automatically at or near any pre-selected landing,
- (ak) "gate lock" or "door lock" means a device as defined in clause(af) for application to a lift-landing or lift car door or gate, as the case may be and so designed that the door or gate can only be opened when the lift-car is in the landing zone or by a special key;
(al) "gear less machine" means a lift machine in which the motive power is transmitted to the driving sheave from the motor without intermediate reduction gearing and has the brake drum mounted directly on the motor shaft;
(am) "goods lift" means a lift designed primarily for the transport of goods but which may carry a lift attendant or other persons necessary for the loading or unloading of goods;
(an) "guide rails" means the members used to guide the movement of a lift car or counter weight in a vertical direction;
(ao) "guide rails bracket" means the part of a guide fixing which carries the guide seating or bolts and guide clips, and serves to secure them to building or structure;
(ap) "guide rails fixing" means the complete assembly comprising the guide rails bracket and its fastenings; (aq)"guide rails shoe" means an attachment to the car frame or counter weight for the purpose of guiding the lift car or counter weight frame;
(ar) "geared machine" means a machine in which the power is transmitted to the sheave through worm, or worm and spur reduction gearing;
(as)"hospital lift" means a lift normally installed in a hospital/ dispensary /clinic and designed to accommodate one number bed/stretcher along its depth, with sufficient space around to carry a minimum of three attendants in addition to the lift operator.
(at) "landing call push" means a push button fitted at a lift landing, either for calling the lift car, or for actuating the car indicator;
(au) "landing door" means the hinged or sliding portion of a lift well enclosure, controlling access to a lift car at a lift landing;
(av) "landing zone" means a space extending from a horizontal plane 40 centimeters below a landing to a plane 40 centimeters above the landing;
(aw) "leveling device of a lift car" means any mechanism which either automatically or under the control of the operator, moves the car within the leveling zone towards the landing only, and automatically stops it at the landing;
(ax)"leveling zone" means the limited distance above or below a lift landing within which the leveling device may cause movement of the car towards the landing;
(ay) "lift landing" means that portion of a building or structure used for the reception and discharge of passengers or goods or both into or from a lift car;
(az)" lift machine" means the part of the lift equipment comprising the motor (s) and the control gear therewith, reduction gear (if any), brake (s) and winding drum or sheave, by which the lift car is raised or lowered;
(bc) "lift pit" means the space in the lift well below the level of the lowest lift landing served;
(bd) "lift well" means the unobstructed space within an enclosure provided for the vertical movement of the lift car (s) and any counterweight (s) including the lift pit and the space for top clearance.
(be) "lift well enclosure" means any structure which separates the lift well from its surroundings;
(bf)"lifting beam" means a beam, mounted immediately below the lift machine room ceiling. to which lifting tackle can be fixed for raising or lowering parts of the lift machine;
(bg) "operation" means the method of actuating the control of lift machine;
(bh) "operating device" means a car switch, push button or other device employed to actuate the control;
(bi) "overhead beams" means the members, usually of steel, which immediately support the lift equipment at the top of the lift well;
(bj) "over speed governor" means a device which brings the lift car and /or counterweight to rest by operating the safety gear in the event of the speed in a descending direction exceeding a predetermined limit;
(bk)"passenger lift" means a lift designed for the transport of passengers;
(bl) "position and /or direction indicator" means a device which indicates on the lift landing or in the lift car or both the position of the lift car in the lift well or the direction or both in which the lift car is travelling;
(bm) "rated load" means the maximum load, which the lift car is designed and installed to carry safely at its rated speed;
(bn) "rated speed" means the maximum speed attained by the lift car in the upward and downward direction with rated load in the lift car;
(bo) "retiring cam or retiring ram" means a device which prevents the landing doors from being unlocked by the lift car unless it stops at a landing;
(bp) " roping multiple" means a system of roping where in order to obtain a multiplying factor from the machine to the car, multiple falls of rope are run around sheaves on the car or counterweight or both. It includes roping arrangements of 2 to 1,3 to 1 etc.;
(bq) "safety gear" means a mechanical device attached to the lift car or counterweight or both, designed to stop and to hold the car or counterweight to the guides in the event of free fall, or, if governor operated, of over-speed in the descending direction;
(br) "safety gear- instantaneous" means a mechanical device in which the action on the guide rails is effected by means of serrated rollers or cams or wedges applied instantaneously in an emergency;
(bs) "safety gear- progressive" means a mechanical device in which the action on the guide rails is effected by means of serrated rollers or cams or wedges applied progressively in an emergency;
(bt) "section" means a section of the Act;
(bu) "service lift" means a lift with a car which moves in guides in vertical direction, has net floor area of one square meters, total inside height of 1.25 meters, whether or not provided with fixed or removable sheaves and capacity not exceeding 250 Kilograms and is exclusively used for carrying materials and shall not carry any person;
(bv) "sheave" means a rope wheel, the rim of which is grooved to receive the suspension ropes but to which the ropes are not rigidly attached and by means of which power is transmitted from the lift machine to the suspension ropes;
(bw) "slack rope switch" means switch provided to open the control circuit in case of slacking of rope (s).
(bx) "stroke of buffer" means the distance, the contact end of the spring can move under a compressive load until the spring is compressed solid;
(by) "suspension ropes" means the ropes by which the car and counterweight are suspended;
(bz)"terminal slow down switch" means a switch to cut off the energizing current for release so as to bring the car automatically to stop from over runs at high speeds or a switch provided for double speed machine to cut off the supply of relays controlling the high speed at terminal landings;
(cd) "terminal stopping device-normal" means a device for cutting all the energizing current in case of car traveling beyond the top or bottom landings or a device which cuts off the energizing current so as to bring the car to a stop at the top and bottom level;
(ce) " terminal stopping device- final" means a device which automatically causes the power to be discontinued to an electric lift driving machine motor and brake, independent of the functioning of the normal terminal stopping device, the operating device or any emergency terminal stopping device, after the car has passed a terminal landings;
(cf) "top car clearance" means the shortest vertical distance between the top of the car cross head and the nearest part of the overhead structure or any other obstruction when the car floor is in level with the top terminal landings;
(cg)" top counterweight clearance" means the shortest vertical distance between top most part of the counterweight structure and the nearest part of the overhead structure on any other obstruction when the car is in level with the bottom terminal landing;
(ch) "travel" means the vertical distance between the bottom and top lift landings served in case of lift and the vertical distance between bottom terminal landing and the top terminal landing in case of an escalator;
(ci) "trailing cable" means a flexible cable providing electrical connection between the lift car and a fixed point or points:
(2) All other words and expressions used herein and not defined shall have the meanings respectively assigned to them in the Act: