Off Street Parking Standards
(A) Stall Size:
The dimension of the parking stall for different kind of vehicles shall be:
| Vehicle Type | Breadth (m) | Length (m) |
|---|---|---|
| Car | 2.5 | 5.0 |
| Two Wheelers | 1.0 | 1.8 |
| LCV | 3.5 | 7.0 |
| Lorry/Bus | 3.5 | 10.0 |
| Articulated Vehicles [Container Vehicles] | 3.5 | 16.0 |
In cases of parallel parking of cars, the dimension of parking stall shall be 6.0m X 2.50 m. The stall dimensions mentioned above shall be clear of any structural members. Where a stall is adjacent to a large element such as a wall, minimum stall width shall be 2.7m for parallel parking and where cars cannot be parked by reversing, minimum stall length shall be 7.2m.
(B) Parking for Special (physically challenged) persons
For Buildings having more than 2 floors 10% of the required car/two wheelers parking spaces subject to minimum of 2 car spaces and 2 two-wheeler spaces shall be reserved for the physically handicapped persons near the entrance. This is to provide an exclusive reservation of car parking for physically handicapped and also to provide them easy access to the lift and staircase.
(C) Driveway and Aisle Widths
Driveway:
The driveway width shall be 3.0m for one-way movement and 7.0m for two-way movement.
Aisle Widths:
Aisle is a access lane leading to/abutting the individual parking lot within a parking facility. The aisle widths for different types of parking shall be:
| Vehicle Type | Parallel Parking | All angles up to<sub>60</sub><sup>0</sup> | Angles above 60<sup>0</sup> & Perpendicular parking |
|---|---|---|---|
| Two Wheeler | 1.5m | 1.5m | 1.5m |
| Car | 3.0m | 3.0m | 6.0m |
| LCV/Truck/Bus | 7.0m | 7.0m | 10.0m |
The width of the driveway and the aisle shall be free from kerb and other encumbrances.
(D) Width Entry and Exit Gates
The width of entry or exit gates shall be a minimum of 3.0m
(E) Turning Radius
The minimum inner turning radius in driveway areas and ramps shall be 4.0m
(F) Gradient
Slope of parking spaces shall be not more than 4% in any direction.
(G) Ramps
The minimum clear width of the ramps shall be 3.5m for one-way movement and 7.0m for two-way movement. Gradient shall not be steeper than 1 in 8.
(H) Headroom
The clear headroom (between floor and beam bottom) shall be minimum 2.2metres those parts of a building intended to be used for parking of wheeled vehicles and also for all approaching parts like ramp, covered access, etc.