Economizer, air: a duct and damper arrangement with automatic controls that allow a cooling system to supply outdoor air to reduce or eliminate the need for mechanical cooling during mild or cold weather
Economizer, water: a system by which the supply air of a cooling system is cooled indirectly with water that is itself cooled by heat or mass transfer to the environment without the use of mechanical cooling
ECBC Building: a building that complies with the mandatory requirements of §4 to §7 and also complies either with the prescriptive requirements stated under the ECBC Building categories of §4 to §7, or, with the whole building performance compliance method of §9.
ECBC+ Building: a building that complies with the mandatory requirements of §4 to §7 and also complies either with the prescriptive requirements stated under the ECBC+ Building categories of §4 to §7, or, with the whole building performance compliance method of §9. This is a voluntary level of compliance with ECBC.
Effective aperture: Visible light transmittance x window-to-wall Ratio. (EA = VLT x WWR)
Efficacy: the lumens produced by a lamp plus ballast system divided by the total watts of input power (including the ballast), expressed in lumens per watt
Efficiency: performance at a specified rating condition
Efficiency, thermal: ratio of work output to heat input
Efficiency, combustion: efficiency with which fuel is burned during the combustion process in equipment
Emittance: the ratio of the radiant heat flux emitted by a specimen to that emitted by a black body at the same temperature and under the same conditions
Energy: power derived from renewable or non-renewable resources to provide heating, cooling and light to a building or operate any building equipment and appliances. It has various forms such as thermal (heat), mechanical (work), electrical, and chemical that may be transformed from one into another. Customary unit of measurement is watts (W)
Energy Conservation Building Code (ECBC): the Energy Conservation Building Code as updated from time to time by the Bureau and displayed on its website (www.beeindia.gov.in).
Energy Efficiency Ratio (EER): the ratio of net cooling capacity in wattto total rate of electric input in watts under design operating conditions
Energy recovery system: equipment to recover energy from building or space exhaust air and use it to treat (pre-heat or pre-cool) outdoor air taken inside the building or space by ventilation systems
Envelope Performance Factor (EPF): value for the building envelope performance compliancecompliance option calculated using the procedures specified in4.3.5 and 4.3.5.1.1. For the option calculated using the procedures specified in 4.3.5 and 4.3.5.1.1. For the purposes ofpurposes of determining building envelope requirements the classifications are defined as determining building envelope requirements the classifications are defined as follows:
(a) Standard Building EPF: envelope performance factor calculated for the Standard(a) Standard Building EPF: envelope performance factor calculated for the Standard Building using prescriptive requirements for walls, vertical fenestrations and roofsBuilding using prescriptive requirements for walls, vertical fenestrations and roof
(b) Proposed Building EPF: the building envelope performance factor for the ProposedProposed Building EPF: the building envelope performance factor for the Proposed Building using proposed values for walls, vertical fenestrations and roofsBuilding using proposed values for walls, vertical fenestrations and roofs
Energy Performance Index (EPI): of a building means its annual energy consumption inEnergy Performance Index (EPI):of a building means its annual energy consumption in kilowatt-hours per square meter of the area of the building which shall be calculated in thekilowatt-hours per square meter of the area of the building which shall be calculated in the existing or proposed building as per the formula below,existing or proposed building as per the formula below,
annual energy consumption in kWh
total built − up area (excluding storage area and the parking in the basement)in m2
EPI Ratio: of a building means the ratio of the EPI of the Proposed Building to the EPI of theEPI Ratio: of a building means the ratio of the EPI of the Proposed Building to the EPI of the Standard Building.Standard Building.
Equipment: mechanical, electrical or static devices for operating a building, including butq p : , p g g, g not limited to those required for providing cooling, heating, ventilation, lighting, service hotq p g g, g, , g g, water, vertical circulationwa er, ver ca c rcu a on
Equipment, existing: equipment previously installed in an existing building
Equivalent SHGC: SHGC for a fenestration with a permanent external shading projection. It isis calculated using the Projection Factor (PF) of the permanent external shading projection calculated using the Projection Factor (PF) of the permanent external shading projection and Shading Equivalent Factor (SEF) listed in §4.3.1.
Exemption: any exception allowed to compliance with ECBC requirements