Separate floor plans for each of the typical floors have to be prepared with the following details;
(a) Plan of the dwelling units with areas of sub uses such as foyer, living, dining, bedroom, study, kitchen, bathroom, WC, toilet, balcony etc. mentioned separately. The carpet area (excluding exterior wall and balcony of the dwelling unit) and plinth area (including exterior wall and balcony of the dwelling unit) of the dwelling unit has to be mentioned. Area of exclusive balcony and terrace attached to each dwelling unit has to be mentioned.
(b) Room dimensions and details of doors, windows, ventilators, duct doors and other openings shall be shown.
(c) All common areas such as staircases and lifts, corridors / passages, service / ventilation ducts, stores, entrance lobby etc. have to be shown along with dimensions.
(d) Level of floor with reference to the ground level contiguous to the building or the road level whichever is considered for the height of the building.
(e) Minimum Setback line from the boundary of the plot and balconies projecting beyond the setback line.
(f) No. of dwelling units in each floor (details of all types of dwelling units) and no. of typical floors.
(g) Terrace floor plan with details of open terrace, covered terrace, staircase room, lift / lift machine room, overhead tank, toilets and other permitted constructions in the terrace floor. (If overhead tank and the lift machine room is located one level above the terrace floor, the same has to be specifically mentioned in the Terrace floor plan).
(h) Details of all staircases provided (width, tread, riser, landing, handrail, head room, no. of steps in each flight).
(i) Details of corridors / passage (minimum width required and width provided, parapet details)
(j) Section lines
(k) Index of drawing as specified in Appendix-III.