(1) IS: 456:2000 ‘Code of Practice for Plain and Reinforced Concrete’;
(2) IS: 800-2007 ‘Code of Practice for General Construction in Steel’;
(3) IS: 801-1975 ‘Code of Practice for Use of Cold Formal Light Gauge Steel Structural Members in General Building Construction’;
(4) IS 875 (Part 2):1987 Design loads (other than earthquake) for buildings and structures Part2 Imposed Loads;
(5) IS 875 (Part 3):1987 Design loads (other than earthquake) for buildings and structures Part 3 Wind Loads;
-
IS 875 (Part 4):1987 Design loads (other than earthquake) for buildings and structures Part 4 Snow Loads;
-
IS 875 (Part 5):1987 Design loads (other than earthquake) for buildings and structures Part 5 special loads and load combination;
-
IS: 883:1994 ‘Code of Practice for Design of Structural Timber in Building;
-
IS: 1904:1986 (R 2005) ‘Code of Practice for Structural Safety of Buildings: Foundation’;
-
IS 1905:1987 ‘Code of Practice for Structural Safety of Buildings: Masonry Walls; and
-
IS 2911(Part 1): Section 1: 2010 ‘Code of Practice for Design and Construction of Pile Foundation Section 1
Part 1: Section 2 Bored Cast-in-situ Piles
Part 1: Section 3 Driven Precast Concrete Piles
Part 1: Section 4 Bored Precast Concrete Piles
Part 2: Timber Piles
Part 3: Under Reamed Piles
Part 4: Load Test on Piles
For Cyclone/Wind Storm Protection
(12) IS 875 (3):1987 ‘Code of Practice for Design Loads (other than Earthquake) for Buildings and Structures, Part 3, Wind Loads’
(13) Guidelines (Based on IS 875 (3)-1987) for improving the Cyclonic Resistance of Low rise houses and other building.