6.2.1 Permitted Uses/ Activities
The Industrial Land Use Zone has been further divided into five (5) categories and the uses/ activities permitted under each of these categories are given in Table-14
| Category | Type of Industry | Activities/ Remarks |
|---|---|---|
| I-1 | Household industries | Illustrative list as in Table-15 Uses are permitted subject to condition that the zone permits the extent of area and the power consumption does not exceed 5 KW. Power required for air conditioners, lifts & computers shall be excluded while calculating the Kw above. |
| I-2 | Service industries | All uses of I-1 are permitted R&D Labs, Test Centres, IT BT, BPO activities Film City/ Studio |
| I-3 | Light Industries | All uses of I-1 and I-2 are permitted All light industries LPG Storage |
| I-4 | Medium Industries | All uses of I-1, I-2 & I-3 included All medium industries Gas Godown, Warehousing, loading and unloading platforms, Gasoline/ Petroleum Storage |
| I-5 | Heavy Industries | All uses of I-1, I-2, I-3 and I-4 are permitted. All heavy industries. Hazardous industries and heavy manufacturing industries, Pharmaceutical industries. |
Note:
a) Categorisation of light industries, medium industries and heavy industries shall be as defined by Department of Industries and Commerce.
b) Uses permitted subject to condition that the zone permits the extent of the area and installed power and performance characteristics such as Noise, Vibration, Dust , Odour, Effluent, General nuisance are to be considered
c) Uses permitted in all the above categories are subject to space standard and road width as specified in Table 25.
d) Uses permitted in I-3 to I-5 categories are subject to environmental clearances.
| Classification | Industrial Activities |
|---|---|
| 1) Food products | Preparation of bakery products & confectionaries, Candies, sweets, ice & ice creams, Biscuit making, huller and flour mills, Aerated water and food beverages, Supari and masala grinding, Coffee powder packing, milk and dairy products, Juice crushers and processing or such similar nature of activities. |
| 2) Textile products | Embroidery works, handloom and power looms, Hosiery, netted garments, crepe, cotton and silk printing, tailoring of apparels, bedding material, textile bags, mosquito nets or such similar nature of activities. |
| 3) Wood products and carpentry | Manufacture of wooden furniture, fixtures, toys, mirrors & photo frames, Bamboo and cane furniture works, Repair and sale of wood junk and such similar nature of activities. |
| 4) Paper products and printing | Manufacturing of cartons for packing, Printing, publishing, book binding, engraving , etching, Making of stationery - post cards, mathematical items, block/ model making or such similar nature of activities. |
| 5) Tobacco and Agarbathis | Rolling of Beedis, Agarbathis and packing or such similar nature of activities. |
| 6) Leather products | Manufacture and repair of finished leather goods, shoes, Upholstery, suitcases or such similar nature of activities. |
| 7) Rubber and plastic products | Re-treading, recapping and vulcanizing, toy making, Rubber/polymer stamp, brush making, conduit pipes fabrication, buckets and household plastic products, manufacturing of rubber balloons, hand gloves or such similar nature of activities. |
| 8) Metal works | Storage of Metal commodities, Painting and finishing works, Fabrication and welding works, soldering, Toy making, electro plating, mica plating, Engraving, steel ware products and metal works, Metal polishing, general machine jobs, Blacksmith, cutlery, door and window fittings, Aluminium and copper wire drawing and winding, Padlocks and pressed locks, button clips, Precision instruments of all kinds, screws, bolts, nuts, pulleys and gears, oil stove, pressure lamps, hand tools, repair works such as cabinets, furniture or such similar nature of activities. |
| 9) Electrical and Electronics goods | Watch repairs, Storage of electronic components, Rewinding and re-furbishing works, assembly of computers, radio and TV repairing, electrical lamp fittings or such similar nature of activities. |
| 10) Transport equipment | Servicing of automobiles- garages, storage of automobile parts, Painting and washing works, cycle parts and accessories or such similar nature of activities. |
| 11) Glass works | Glass grinding, cutting and finishing, Etching and art works, Manufacture and repair of spectacles, Artificial Glass Jewellery works or such similar nature of activities. |
Note: Uses similar to those mentioned above may be permitted in the respective categories of this Zone by the Authority
6.2.2 Permissible Uses/ Activities under Special Circumstances
The industrial land use has been classified into the following two broad categories for the purpose of defining the regulations:
i. Industrial - Hi-Tech (I-2) involving activities associated with new technologies: IT, IT Enabled Services, BT, electronics, telecom and other emerging areas and as well as services sector organised in industry format (Back offices, etc).
ii. Industrial - Others (I-5) includes all other categories of industries excluding Industrial Hi-Tech
| Road Width (m) | Permissible Activities for Hi-Tech Industrial Area (I-2) | Permissible Activities for Other Industrial Area (I-5) |
|---|---|---|
| Below 12.5 | R, C-1, PSP-1,T1 | R, C-1,PSP-1, T1 |
| 12.5 and below 18.5 | R, C-2, PSP-2, T-2 | R, C-2, PSP-2,T-2 |
| 18.5 and below 24.5 | R, C-3*, PSP-3,T-2 | R, C-4, PSP-3,T-3 |
| 24.5 and above | R, C-3, PSP-3,T-3 | R,C-5, PSP-4,T-4 |
* Subject to space standards
6.2.3 FAR and Ground Coverage
The Key regulations are:
i. The regulations for Industrial- Hi-Tech shall be applicable for plot size upto 12000 sqm.
ii. The FARs, Ground Coverage and other regulation like Set-back, Parking etc for Industrial Hi-Tech shall be governed as per the Regulations prescribed for Commercial Land Use as per the Planning Zone irrespective of the Land Use Zone subject to permissible uses as per the road widths and the space standards. The Base FAR for Hi-Tech Use will be 0.25 above the prescribed Base FAR for Commercial Use in the respective Planning Zone, however, the total maximum FAR shall remain the same.
iii. In Industrial Use Zone, commercial use may be permitted as main use subject to road width and space standards.
iv. For plot sizes above 12000 sqm for Industrial- Hi-Tech, the regulations for non-residential layouts/ non-residential DP shall be applicable.
v. For Plots above 2000 sqm, the 10% of the total area shall be earmarked for open spaces.
vi. No further Heavy Industries (I-5 Category), industries falling under Red Category as defined by CPCB and quarrying and mining activities shall be permitted within the BMA area.
vii. In case of planned industrial areas, the ancillary uses up to a maximum of 10% could be allowed. However, if the area is exclusively planned for Hi-Tech Industrial Use, ancillary permissible uses as given in Table 16 are permissible to an extent of maximum 40% of the built-up area out of which up to 1% could be used for commercial activities. In case of areas planned as General Industrial Area, the plots/
blocks allotted for Hi-Tech Industries shall also be eligible for 40% of the built-up area for ancillary use and the regulations applicable for Hi-Tech Industries.
viii. The FAR, Ground Coverage and Set-backs for different plot ranges along with the requirements for minimum frontage and the road width for Industries other than Hi-Tech Industries shall be as given in Table 17.
| Sl No. | Extent of the Plot in sqm | Min. Frontage (m) | Ground Coverage | Permissible FAR | Setback in meter | Road Width (m) | ||
| Front | Rear | Side | ||||||
| 1 | Upto 250 | 9 | 1.5 | 4.50 | 2.50 | 1.50 | 9 | |
| 2 | Above 250 Upto500 | 12 | 1.5 | 4.50 | 3.00 | 3.00 | 12 | |
6.2.4 Regulations for Flatted Factories
The regulations for Flatted Factories shall be as given hereunder.
| 1 | Minimum Plot Area | 1000m<sup>2</sup> |
|---|---|---|
| 2 | Maximum Ground Coverage | 40% |
| 3 | Maximum Allowable FAR | 2.00 |
| 4 | Minimum Setback (m) | Front-8.0 Side and Rear -6.0 |
| 5 | Maximum Height of Building | 15m |