i. Proposed road width shall be as in the Master Plan or as proposed by the local authority. If proposed road width is not specified for any existing road (i.e. Roads which are not proposed for widening) and, then the existing width shall be considered as proposed width for applying the provisions related to the FAR and other regulations.
ii. The centre line of the road fixed by the Authority/local Authority shall be considered as the centre of the road. The Authority/ local Authority shall fix the centre line of all roads having proposed width of 12 m and above. If the centre line is not fixed by the Authority/ local Authority, the centre of the existing road shall be considered as the centre of the road.
iii. While determining the width of the road the distance between the boundaries of a road including foot path, drains measured at right angles at the center of the plot shall be considered.
iv. The minimum width of means of access shall be governed as per the following provisions:
(a) The means of access to the plot which would be other than 'through public roads and street' (dead end road without any cross roads), shall not be of more than 30 m in length from the public road or street.
(b) The means of exclusive access which would be other than through public roads or streets having more width than the public road or street, but less than 30 m in length, then width of the public road or street shall be considered for reckoning FAR.
(c) If the width of such access is of 3.5 m,4.5m and 6m, the F.A.R. and height of buildings coming up in such plots shall be regulated according to the width of the public road or street for buildings of height upto G+1 floors or 7 m, upto G+2 floors or 10 m and G+3 floors or less than 15 m respectively. For Plots with area of above 360 sqm in Planning Zone A and for Plots with area of above 500 sqm in Planning Zone B, the minimum width of such access shall not be less than 7.5 m for granting the permission for Apartment Building/ Group Housing.
(d) If the width of access road is less than 3.5 m, then max floor area permitted in such cases shall not exceed 150 sqm and 50 sqm in residential and commercial zones respectively irrespective of the site area.
(e) If the length of means of access exceeds 30 m, F.A.R. and height of the building abutting such means of access shall be regulated with reference to the width of such means of access subject to a maximum FAR applicable for road to which such means of access is connected.
(f) Access rights needs to be obtained before applying for any sanction/permission for development. Documents to support the rights obtained needs to be submitted along with the plan.
(g) In case of sub-divisions/ development plans, the provisions related to minimum width of means of access shall be applicable as defined in the regulations for subdivision/development plan.
(h) The proposed land use through which means of access is being taken, even if owned by applicant, such land use shall be not treated as land use for the main property. The Land Use as depicted in RMP 2031 shall be applicable to rest of the property i.e after the means of access.
v. No construction may be permitted on plots abutting roads having less than 6m width unless the portion of the plot required for road widening up to 6m width or to any other required width prescribed in the Master Plan or by the Local Authority is surrendered free of cost and can avail the FAR for the surrender portion.
vi. In case of roads having service roads in addition to the main roads the width of road shall be aggregate width of service roads and main roads for determining FAR and height of the building.
vii. Every proposed road shall meet another road of equal or higher width. For the purpose of maintaining the road hierarchy, the Authority may direct the applicant(s) submitting application for sub-division/ layouts or development plan or any other approval to amend/ modify the road width proposed as part of the planning permission sought to integrate the developments accordingly.
viii. In case of roads with varying widths, the existing road width shall be the average
width considered by taking road width measurements for the varying sections and applied with weighted average for the lengths of varying sections of the road. Such road should lead to another road having the same or higher width. However, at any point on that road, the width should not be less than 75% of the width considered as existing width. If more than 50% of the length of the road with road width less than 75% of the average width is available, then the regulations applicable for lower road width shall be applicable.
ix. While developing a land, if for any reason, the road has to be stopped without continuation, and then Cul-de-Sac with turn around area of 9 m Radius at the end shall be provided.
