1) Requirements for All Applications -
Every person, including Central and State Government Departments and Semi-Government Departments/Organisations excluding the Defence Ministry, who intends to conduct any site development works not granted exemption under Regulation 3, shall obtain a site development permit by giving an application to the Aizawl Municipal Corporation in the prescribed form given in ANNEXURE - A to be purchased from the Office of the Aizawl Municipal Corporation. The application shall be accompanied by the prescribed fees and three copies each of the documents mentioned in Regulations 6.3 and 6.4 below for the type of site development being performed. One copy each of these documents shall be returned to the applicant after issue of permit or refusal.
- Site Development Designation -
i) Engineered Site Development :
All site development that takes place in mapped zones of Moderate, High or Very High landslide hazard, as defined per the Landslide Hazard Maps, shall be designated as “Engineered Site Development.” All site development in areas not yet mapped to the standards adopted by the Landslide Policy Committee for Aizawl City, or for which such Landslide Hazard Maps are still under development shall be designated as Engineered Site Development if the average slope of the plot is greater than or equal to 24 degrees.
In addition, site development in any area, including areas of Low landslide hazard as defined per the Landslide Hazard Maps, shall be designated as Engineered Site Development if any of the following conditions apply:
(1) Height of any cuts/excavations is 3 meters or more –OR–
(2) Site development works are in excess of 200 cubic meters –OR–
(3) Site development works are proposed to support any structure.
All engineered Site Development shall be performed in accordance with an approved site development plan and specifications, which incorporates the findings and recommendations of the geotechnical report defined below in Regulation 7, unless otherwise required by the Building Official.
ii) Regular Site Development :
Regular site development is allowed ONLY in zones of Low landslide hazard as defined per the Landslide Hazard Maps. In areas not yet mapped to the standards adopted by the Landslide Policy Committee for Aizawl City, or for which such Landslide Hazard Maps are still under development is allowed only on slopes where the average slope of the plot is less than 24 degrees.
Site development in zones of Low landslide hazard involving less than 200 cubic meters and that will not support any structure shall be designated “Regular Site Development” unless the permit holder chooses to have the site development be designated as Engineered Site Development, or the Building Official determines that, due to the existence of special conditions or unusual hazards, the site development should be designated as Engineered Site Development.
3) Requirements for Regular Site Development Permit Applications -
An application for a regular site development permit (Form 1) shall be accompanied by the following supporting documentation:
i) Copy of ownership title.
ii) No Objection Certificate from the concerned Local Council, including No Objection from adjacent property owners to the plot boundaries shown on the site plans. The concerned Local Council and the adjacent property owners shall base any refusals to issue a No Objection Certificate on verifiable concerns regarding unsafe or inappropriate site development, or on verifiable concerns that the plot boundaries are incorrectly defined. The applicant for the site development permit shall be able to request that Aizawl Municipal Corporation and the Aizawl Municipal Corporation Geologic Review Board (per Regulation 8) review the reasons for refusal to issue a No Objection Certificate and determine whether the concerns raised meet the standards described in this paragraph, and either overturn or uphold the objection based on such review.
iii) Estimated quantities of excavation and fill, and a section drawing showing how quantities were determined.
iv) Statement of proposed land use for the site on which the site development is to be performed.
v) Site plans in sufficient clarity to indicate the nature and extent of the work. A site development plan shall show the existing grade and finished grade in contour intervals of sufficient clarity to indicate the nature and extent of the work and show in detail that it complies with the requirements of these regulations. The plans shall show the existing grade on adjoining properties in sufficient detail to identify how grade changes will conform to the requirements of these regulations. The maximum permissible scale of the site plan shall be as per the Regulation 5.5 of the Building Regulations. The plans shall give the location of the work, the name of the owner, and the name of the person who prepared the plan. The plans shall include the following information :
(1) General vicinity of the proposed site.
(2) Plot boundaries, delineated by length and bearing.
(3) Limits and depths of cut and fill.
(4) Location of any buildings, roads or other structures where work is to be performed, and the location of any buildings or structures within 5m of the proposed site development.
(5) Contours, flow areas, elevations, or slopes, which define existing and proposed drainage patterns, including storm water provisions in accordance with the requirements of Regulation 27.
(6) Location of existing and proposed utilities, drainage facilities, sewage/septic systems, and recorded public and private easements and restricted use areas within 5 m of the proposed site development.
(7) Location of any natural streams, riverine reserves or flood hazard areas as designated and defined by Aizawl Municipal Corporation.
4) Requirements for Engineered Site Development Permit Applications -
An application for a permit for engineered site development (FORM 2) shall be accompanied by the following supporting documentation:
(i) Copy of ownership title.
(ii) No Objection Certificate from the concerned Local Council, including No Objection from adjacent property owners to the plot boundaries shown on the site plans. The concerned Local Council shall base any refusals to issue a No Objection Certificate on verifiable concerns regarding unsafe or inappropriate site development, or on verifiable concerns that the plot boundaries are incorrectly defined. The applicant for the site development permit shall be able to request that Aizawl Municipal Corporation and the Aizawl Municipal Corporation Geologic Review Board (per Regulation 8) review the reasons for refusal to issue a No Objection Certificate and determine whether the concerns raised meet the standards described in this paragraph, and either overturn or uphold the objection based on such review.
(iii) A statement of the quantities of material to be excavated and/or filled, and a section drawing showing how quantities were determined. Earthwork quantities shall include quantities for geotechnical and geological remediation. In addition, a statement of the quantities of material to be imported or exported from the site.
(iv) A geotechnical report prepared by an engineering geologist or geotechnical engineer registered/licenced by Aizawl Municipal Corporation and containing the information in Regulation 7, and including the date of the report together with the names, addresses, and phone numbers of the firms or individuals who prepared the report.
(v) A statement of the estimated starting and completion dates for proposed work.
(vi) Specifications containing information covering construction and material requirements.
(vii) Site plans of sufficient clarity to indicate the nature and extent of the work proposed and shall show in detail that the proposed work will conform to the provisions of these regulations and all relevant laws, rules, and regulations. The maximum permissible scale of the site plan shall be as per the Regulation 5.5 of the Building Regulations. The plans shall include or be accompanied by the following information:
(1) First sheet depicting the location of the proposed work, the name and address of the owner, and the person by whom the plans were prepared.
(2) Property limits and accurate contours of existing ground and details of terrain and area drainage.
(3) Location of any buildings or other structures on the site where work is to be performed, and the location of any buildings or structures within 5 m of the proposed site development.
(4) Location of existing utilities, roads, road reserves, recorded public and private easements, restricted use areas, septic systems, drains, natural streams, riverine reserves or flood hazard areas on the site where work is to be performed and within 5 m of the proposed site development.
5) Competence of Technical Personnel -
The permit holder is responsible for employing competent personnel for all designing and constructing all site development works. Qualifications and competence of the technical personnel and licence fees shall be as given in ANNEXURE - B.