Development controls have been defined as the mechanism through which entire process of urban development is regulated to achieve the objective of promoting overall benefit of the society and creating a distinct image of the city. It includes guiding the development and use of land, curbing misuse of land and promoting rational and orderly development of built environment. Development controls are required to meet situations and contexts which are generally static. In this context they tend to become to rigid and complex. Looking at the far reaching impact and implications of the development controls on the growth and development, character, fabric and personality of a city, they need to be framed with great care and abundant caution. Considering the larger public interest and general welfare of the community, formulation of the development control should satisfy the basic requirements of the health, safety convenience, economy and amenity.
16.1Need and Purpose of Development Controls and Regulations:
Chandigarh has been widely acclaimed as a Mecca of planning and architecture in view of various innovations incorporated in the planning, designing, development and management of this capital city of the state of Punjab. The city today is valued universally for being the first realization of Le Corbusier’s urban percepts and the site of his most elaborate architectural creation.
Chandigarh has been credited with extensively using mechanism of development controls for promoting state of art development and quality built environment.
In the absence of any statutory master plan, growth and development of Chandigarh has been exclusively regulated through various development controls, which have been put into operation as integral part of city planning and development process.
16.2Types of Development Controls and Regulations in Chandigarh:
To control and regulate the development of the city in accordance with founding concept and ideas as envisaged by the Architect Planner, various Acts/Rules and Architectural and Urban Legislations were put in place, which are as follows:-
(i) The Punjab Capital (Development and Regulation) Act 1952
Development within the city is being managed through various kinds of development controls. Development controls within the city have its genesis in ‘The Capital of Punjab (Development and Regulations) Act, 1952. Sections 4 of the said Act, empowers Chief Administrator to issue such directions, as may be considered appropriate in respect of any site or building for the proposes of proper planning or development of Chandigarh. Various rules enacted under said Act are as under:-
(ii) The Punjab Capital (Development and Regulation) Building Rules 1952
Under the provisions of above mentioned Act, The Punjab Capital (Development and Regulation) Building Rules 1952 have been formulated. These Building Rules, various administrative procedures were formulated such as procedure of submission of building
application, planning and architectural controls, materials and structural controls, drainage control etc. Building plans of all private buildings in the city are sanctioned in accordance to these Building rules. Occupancy certificates are issued only to buildings which are built as per sanctioned plans and various types of penalties are also imposed in accordance to these building Rules. These rules have been amended from time to time keeping pace with the advancements in building technology, genuine needs of the masses and various provisions in the referral publication such as NBC.
(iii) The Chandigarh (Sale of sites) Rules 1952
These rules govern the sale of various types of sites in Chandigarh either through auction or allotment.
(iv) Chandigarh Tree Preservation Order 1952
These rules were framed to preserve the protected trees, group of trees or woodland areas which form the green cover of the City. The rules prohibit cutting of trees in any part of the woodland area shown in the zoning plan.
(v) The Punjab New Capital (Periphery) Control Act 1952
Haphazard, unplanned substandard and ramshackle development around the city is regulated and controlled by ‘The Punjab New Capital (periphery) Control Act, 1952, Act, which controls and regulates the area contained in 16 kms. belt, around the new capital of Chandigarh, declared as Periphery, under the provisions of the said law. This act was formulated to ensure regulated development of the Capital City and to eliminate emergence of slums and haphazard development around the new City.
The main aim of this Act is :
To freeze the landuse in the peripheral area (primarily agricultural) and to retain its basic character. This act extended up to 16 km. built around the city.
To prevent change in landuse except as permitted.
To provide ample area for future growth
To identify areas, which will provide agricultural, diary, poultry products for day to day needs of the city.
To clearly demarcate the functions of the capital city and its periphery for evolving harmonious relationship between the two.
To provide a legal framework for achieving above objectives.
To channelize growth and development in identified areas only.
Regulations and controls
All the buildings are subjected to different development controls for regulating their design and construction. The application of the development controls have been largely dictated by the category of buildings, location of the site, size of the site and need to regulate the building design/architecture etc. Therefore, Chandigarh has put in operation following two distinct sets of development controls to regulate its growth and development both within and outside the city:
a. Zoning Regulations
b. Architectural Controls
a. Zoning Regulations
To control and regulate the development of the city in accordance with founding concept and ideas as envisaged by the Architect Planner, the Punjab Government formulated Punjab Act XXVII of 1952 under which the Capital of Punjab (Development and Regulation) Act 1952. This Act lays various mandatory rules and regulations in respect of erection of buildings in the Chandigarh Capitol Project and confers upon the Chief Administrator, Capital Project the power to frame and amend rules.
Types of Architectural Controls
The relaxations have been provided in the controls based on case to case basis and the representations received from time to time from the plot owners. However, most of the relaxations are provided in such a manner that the basic architectural parameters of the related buildings are not altered. Following types of Architectural Controls were made applicable in various parts of Chandigarh:
a) Full Architectural controls
b) Controls along major arterial roads
c) Frame controls
d) Architectural controls houses.
e) Controls in Sector 17 and Sub City Centre Sector 34
f) Gate and boundary walls
g) Full Architectural Controls – Phase I of Chandigarh
a) Full Architectural Controls:- Full architectural controls were created primarily for the commercial and residential buildings abutting the shopping streets (V4 roads) wherein the entire external facades and internal planning was to compulsorily comply with the standard design provided by the Government.
Houses up to 1 kanal plot area were brought under architectural controls for which design was supplied by the Government. These architectural controlled houses were in phase I sectors such as 10, 11,18,19,27 etc. However, these architectural controls have been relaxed vide notification of Chandigarh Administration dated 16.10.2008 and presently in residential houses of all categories, zoning parameters have also been made applicable simultaneously.
The Shop-cum-Flats (SCFs) abutting the V4 streets in Phase I sectors are also covered under architectural controls from the very beginning and the controls provided for mixed land use pattern i.e. shops on ground floor and living units on first floor and barsati. However, the conversion of SCF to SCO has been permitted by the Chandigarh Administration. In Phase II sectors, the full architectural controls were restricted only to commercial buildings (shop-cumoffices and booths) on V4 streets and the plotted attached houses across the street were replaced by multi storied housing.
b. Architectural Control
The Edict of Chandigarh states that certain areas of Chandigarh are of special architectural interest where harmonized and unified composition of buildings is aimed at. In these areas, absolute architectural and zoning controls should remain operative. The planners of the city employed large scale aesthetic controls ranging from urban design measures to extensive architectural controls that prescribe volumes, outlines and skyline, forms, spatial setting, facades, materials, textures, colours, fenestrations and even boundary wall and gates. These architectural controls depict the architect’s interpretation of available technology, climate, social order of the democratic nature placed in the context of modernism. These controls were framed to provide an egalitarian out look to the urban character of the city where the facades and profiles of the built environment do not depict the socio – economic conditions of the citizens.
b) Controls along major arterial roads
The architectural controls for commercial and institutional buildings were evolved for all the major arterial roads of the city - Madhya Marg (V2), Jan Marg (V2) Dakshin Marg (V2)Himalaya Marg (V2b) Shopping streets (V4) and varied from street to street in detailing but retained similar character and concept. The controls whether commercial or institutional can be classified either as brick structures or R.C.C structures or composite built forms. The commercial buildings built initially were mostly linear blocks abutting on parking spaces placed along major avenues, however subsequently the linear layout was changed to an M-shaped layout, creating parking enclosures on front and rear sides of these showrooms.
The service lane and rear courtyards were omitted. The institutional buildings of plotted development which are composed of multiple blocks of varying heights placed at angle to the avenues in order to facilitate north lights. While the tower blocks along Madhya Marg are four storied, those along Jan Marg are higher having six storeys. Incremental development of the complexes and subdivision of these plots was permitted within the architectural control. The architectural controls evolved on the basis of an economical structural grid, of 1 7 ′ - 3 ′ ′ c/c in most of the cases, the same was repeated to carve 2 bays or 3 bays site as per the requirements and optimum use of the space. In the case of SCFs in Phase-I sectors, the grids were of a smaller size, keeping in view the economic limitations and requirement for smaller size of neighbourhood shops.
c) Frame controls
Frame controls were essentially evolved for row type attached houses on plots varying from 5 marla to 14 marla category. Prior to the evolution of frame controls, the houses were designed keeping in view general building byelaws and zoning restrictions. Since the experiment of developing small plots attached to each other and sharing common walls on both sides according to zoning guidelines resulted in a haphazard street picture, the need for frame controls was felt. Frame control design comprises of fixing the extent and heights of the party walls and a top course and connecting them with a frame. The building portion which can be of any design stays behind this frame. Initially, the frame controls provide standard sizes of doors and windows which could be chosen and used in any manner. Further, the size and percentage of fenestrations on facades were also fixed. However, these stringent controls were relaxed subsequently allowing flexibility in the size and shape of the doors and windows.
There are separate frame controls for marla houses in both the phases of Chandigarh. The frame controls in phase I sectors provide for incremental construction in 3 phases up to a maximum height of 32’-3”, wherein the final built form is cuboid in volume with equal areas on all floors. The frame controls in phase II sectors mandated compulsory stepped rear terraces, each provided with brick screen walls for outdoor sleeping. The maximum height of these houses is 3 2 ′ - 3 ′ ′
However, later, the above mentioned maximum height relaxation upto 3 3 ′ - 0 ′ ′ and coverage of compulsory rear open terraces was also made allowed. But, presently, the above mentioned category of houses is being governed by the Zoning Parameters vide notifications dated 16.10.2008. The description of the same is mentioned in annexure..
d) Architectural Control Houses/Building Height Restrictions:- Architectural Control Houses are located in Ph-I Sectors along Uttar Marg, Leisure Valley and certain V3 roads. These controls restricted only the footprint, volume and the height of the house. The height of these houses was restricted to double storey in most of the cases to provide unhindered view of the distant Shivalik hills from the northern sectors, where most of the architectural controls houses are located. However, the said height restriction has also been relaxed vide notification dated 16.10.2008. In some of the phase-1 sectors i.e. 4, 5, 11, 19, 20, 27, 28 of Chandigarh, the building height controls were applicable with the maximum height of 2 4 ′ - 0 ′ ′ and 2 5 ′ - 6 ′ ′ respectively with the maximum number of storeyes two. The said controls were later replaced by the provisions of Zoning Plans, which are applicable presently also. The description of the same is mentioned in annexure.
e) Controls in City Centre & Sub City Centre
City Centre: Sector-17
Sector 17 designed as City-Centre of the city has cross-axial layout and rigid architectural controls. Various restrictions have been imposed on design elements like size and grid of columns, height of buildings, width and height of passages, size of show-windows and glazing, placement of core, ducts and staircases etc. Use of materials and system of construction to the extent of shuttering pattern has also been specified in Architectural Control Sheets of the City Centre. The material used for buildings is mainly concrete; brick having been used at some places. The urban form of the City Centre is an extended view of RCC structures which creates a sense of order. Depending on the façade controls, the buildings in the City-Centre can be divided into following three types:
Exposed brick faced SCFs placed along V4 of the sector. A four storeyed structures planned on a grid of 11’-3”, with 3-bays constituting a single plot having a courtyard at the back and a service core for each plot. The ground floor generally consists of shops; first and second floor has either shop or offices. Third floor was designed as the accommodation for the essential staff of the commercial establishment. There is no basement in these blocks, but there is a provision for mezzanine floor. The façade of the building is straight and uniform with exposed brick work; and rectangular concrete columns in the public corridor. The upper floors have recessed balconies on both the facades.
Exposed concrete SCOs and other public buildings. Four storied structures planned on a RCC framed structural grid of 17’-3”x17’-3” to accommodate large showrooms and departmental stores. The controls permit a combination of two or more floors and also an additional floor provided that the external façade is not altered . On the first, second and third floors 6’-9” wide balcony has been made compulsory to provide shade from the summer sun, monsoon rains and inclement
weather. Repetitive use of concrete parapets on these balconies gives a specific architectural character to the City-Centre. A few public buildings like State Library, Gallery of Portraits, Estate Office, State Bank of India Building and Post & Telegraph Building are also built with slight variations within the framed façade. Undulatory modular glazing has been provided on upper floors.
* Schematic Design Controlled: Special type of buildings such as cinema halls and petrol stations etc. located in architecturally controlled area of the City Centre, Sub City Centre and along important avenues – Madhya Marg, Jan Marg etc. were subject to Schematic Design Control. The controls evolved out of the functional requirements that dictate the architectural character of the building and defines the outer form, skyline, volume whereas the internal planning is left to the discretion of the owner.
Sub City Centre Sector 34
Although the architectural control of Sector 34 differs in detailing from that of Sec-17, but there is similarity of expression due to use of RCC and the modular structural grid adopted.
f) Gates and boundary wall: All gates and boundary walls are also to conform to standard designs in order to ensure a uniform street picture. Initially the front boundary wall of attached as well as detached / semi detached houses was 2’-5½” high but subsequently however the same was increased to 3’-8 ½” height. Further, the provisions regarding locations and number of gates have also been relaxed by Chandigarh Administration. The description of the same is mentioned in annexure.
New Additional Norms / Regulations for Areas
The norms, which are not covered in the existing norms already notified by the Chandigarh Administration and norms for the activities which have been freshly proposed in this Master Plan have also been finalized on the basis of the proposals given in the Master Plan as well as the recommendations of Master Plan Committee, which are as follows:-
a) Residential
i) Permissibility of landuses in proposed residential pockets:-
The social, educational and cultural facilities like school, community centre, religious buildings, parks, open spaces and other public facilities as provided in various sectors in Chandigarh shall compulsorily be provided in the proposed residential areas/pockets in Chandigarh.
Servant Quarters in Residences
The servant quarters in the houses having area of 1 Kanal and above has been made mandatory.
Development Controls/norms for buildings in Manimajra
The norms as prescribed by the Municipal Corporation, Chandigarh shall be applicable to the area falling within the limits of planning area of the Chandigarh Master Plan 2031, Manimajra, except the following areas, where the norms mentioned in their Zoning Plans/approved drawings shall be applicable:
Pocket 1 (commercial),
Pocket 6 (Motor Market and Commercial Complex),
61.21 acre residential-cum-commercial scheme on the east of Chandigarh – Kalka Road,
Group Housing in Pocket 2 & 3,
Modern Housing Complex in Pocket 4 & 5 and
Rehabilitation colonies developed by Chandigarh Administration.
On other Group Housing, Commercial, Government and semi government norms as approved by the Chandigarh Administration shall be applicable.
b) Institutional
IT Park, Phase-III**:- For the site for IT Park, Phase-III as earmarked in the Master Plan, if decided to be developed for the said purpose by the Hon’ble Court as the matter is sub judicious, the norms shall be as follows:-
Volumetric Controls:- The following norms shall be applicable on the IT Park, Phase-III, Chandigarh:-
Sr.No.
Parameters
Norms
1
MaximumPlotDensity
25unitsperacre
2
FSI
1.00
3
Groundcoverage
40%
4
Height
36'-0"
5
Othernorm
Low density with lush green
(*As decided in the 51st Master Plan Committee meeting held on 17.8.2011) (**As decided in the 53rd Master Plan Committee meeting held on 6.9.2011)
Institutional Area: Sarangpur
In the institutional pockets in Sarangpur (except Educity), in village Dhanas and near Manimajra shall be developed with low density and low rise buildings with the following parameters:-
Sr.No.
Parameters
Norms
1.
Maximum Groundcoverage
20%
2.
MaximumFAR
0.5
3.
MaximumHeight
36'-0"
4.
Maximum No. of storey
3
5.
Parkingnorms
4 ECS for 100 sq. mt. of covered area.Surfaceparking-Minimum20%ofthesitearea.
c) Environment
The norms related to various environmental factors related to Chandigarh have been finalized by the Master Plan Committee and in the proposal part of Master Plan, which are given as below:-
i) Green buffer/ strips
The specified width of plantation as green buffer/strip shall be developed along various features/ landuse as described below:
Sr. no
Feature/area
Width of green buffer/ strip in meters
Condition
1.
Patiala-ki-Rao,Sukhna Choe and Natural choe
100
Shall be declared as Eco sensitivezone.
2.
Interstate border of Chandigarh with PunjabandHaryana
100
Wherever non compatible landuse exist on other side of interstateborder.
3.
Along roads (on eitherside)
30
To give the feel of gardencityChandigarh.
4.
Railway Line (on eitherside)
30
Note:- The owner of sites, wherein the above areas are falling shall be liable to maintain the specified width of buffer strip.
ii) Open Spaces:
No further construction of community facilities in the planned open spaces is permitted which interfere with pedestrian movement, availability of green spaces and natural drainage.
Large campuses like PGI, Panjab University, CSIO, IMTECH and housing societies shall be encouraged to improve their water, energy and resources use efficiencies and introduce waste water recycling.
iii) Securing the Lake’s Catchment and Wildlife Sanctuary:-
The entire catchment of Sukhna Lake must be protected from any activities that may threaten the lake’s lifespan.
No development in the immediate vicinity of the Wildlife Sanctuary should contravene the objectives of the Wildlife conservation.
iv) Eco sensitive Zone:
Chandigarh Administration has constituted a Committee to determine the extent of Eco-Sensitive Zone to be declared around the Sukhna Wildlife Sanctuary and the recommendations of the Committee shall be applicable accordingly. The norms shall be made applicable after approval of the competent authority.
d) Traffic transportation
Metro Act:- Provision of Metro Act to be adopted by the Chandigarh Administration shall be followed.
e) Telecommunication
Development controls for abadi deh of Village falling in the limits of U.T., Chandigarh
The notified Rural Bye-laws of Chandigarh Administration shall be applicable on areas falling in abadi-deh/phirnis of the villages and areas proposed for expansion of various villages.
i)The draft of said notification has been submitted for approval before finalization of the same, the detail of the same is as given below:
Initially, the Chandigarh Administration(Erection & Re-erection of building) Rules, 2006 for the villages in the Municipal area of Municipal Corporation of Chandigarh were notified under Sub-Section 2 of the Section 5 (2) read with Section 22 of the Capital of Punjab (Development & Regulation) Act, 1952 vide Notification No.26/6/39/UTFI(3)-2006/7869 dated 27.12.2006.
The provisions of above mentioned notifications were found to have many limitations like limited definitions, not defining elaborated procedure for sanctioning of building plans, not having provisions for the private developers, energy conservation etc. and with limited volumetric controls having only details of site coverage only some categories of plots.
These rules were also deliberated under the Chairmanship of AA, UT on 21.12.2010 and accordingly the same were drafted by the Department Of Urban Planning, UT, Chandigarh. The feedback has been received from EO, UT, Additional Commissioner, MC and Director Rural Development and Panchayat and the same has been incorporated in the draft Rural Building Byelaws. The provisions of draft rules have been made with the following considerations:
Exhaustive definitions given.
Detailed provision given w.r.t. contents of the submission drawings - the site plan, floor plans, sections and elevations.
Plan Approval Committee is defined.
Provision of 60 days to approve the plans.
Provision made for revalidation of building plans with prescribed fee as applicable.
Provision made to give at least one week notice before erection or re-erection. Provision also made for DPC.
Provision made for partial occupation.
In addition to width minimum riser/tread for residential as well as commercial buildings defined.
Provision made for Rain Water Harvesting & Solar Water Heating System.
No provision for private developers.
Maximum permissible height.
Site coverage of commercial and institutional buildings has been defined.
Siting norms for commercial, social facilities like school, community hall, dispensaries have also been defined.
The guidelines for earthquake safe construction have been defined on the basis of the Model Rules forwarded by Government of India.
The parameters of volumetric controls of the residential building have been elaborately defined as below:
Plot size (in Sq.Yrds)
Ground Coverage
FAR
Set back
Upto 100
70%
2
5'
101-250
70%
2
10'
251-500
70%
2
10'
501-1000
50%
1.5
15'
Above 1001
separate zoning
Provision of Mobile Tower Policy:-
Installation of Mobile Towers shall only be allowed as per the provisions of notified Mobile Tower Policy by the Chandigarh Administration.
Earlier, Chandigarh Administration issued two policies/guidelines regarding installations of Mobile Towers in Chandigarh, one in 2004 and another in 2008. The features of these policies have been mainly procedural and similar to the Building Byelaws. Mainly the security and structural safety aspect of the buildings has been handled in the policy.
As per 2008 Policy, these towers are allowed only on non-residential buildings in UT, Chandigarh. The mobile tower operators are required to seek prior permission from Chandigarh Administration before installing the tower. Since, in several parts of UT, Chandigarh adequate number of non-residential buildings are not available, large number of towers have come up on residential buildings in village area is supervised by the Municipal Corporation and some of them have come up in the developed sectoral grid area of Chandigarh. Hon’ble Punjab & Haryana High Court and even in the Hon’ble Supreme Court of India.
While formulating the new Mobile Tower Policy, the polices/guidelines of the year 2004 and year 2008 and representation of the mobile operators, in addition to the related norms of all the concerned departments/organizations have been taken into account. In the new policy, for the interest of providing seamless uninterrupted mobile services which has become an essential service for any citizen, the area where adequate number of non-residential buildings are not available, it has been proposed that a small Micro Cell based pole be allowed on residential buildings also to provide continuous network availability.
All the telecom operators are directed to get the EMF level checked from some third party at regular intervals for compliance of these guidelines. The applications for the same shall be submitted to the Estate Office of UT, Chandigarh and Commissioner, Municipal Corporation for their respective areas, which they are mandated to implement the building byelaws. If any applicant is not satisfied with the orders of the Estate officer/Commissioner, MC, then the concerned applicant can file an appeal before the Finance Secretary-cum-Chief Administrator, UT, Chandigarh in this regard. Further, the action regarding unauthorized Mobile towers shall be taken by the above mentioned organizations in their jurisdiction area.
The draft Mobile Tower Policy has already been notified by the Chandigarh Administration on 16/10/2012 for public objections/suggestions and the same is under consideration for publication of final policy.
f) Agriculture Zone:- For the activities, which have been made permissible in the agriculture pockets of the Chandigarh Master Plan proposal, the norms have been descriptively evaluated to control and regulate the unauthorized and haphazard development within these pockets.
h) Powers for Development of Areas in Chandigarh:- The proposed Residential, Commercial, Industrial, Transportation or public facility areas in Chandigarh Master Plan 2031 are reserved for development by the Chandigarh Administration or its undertakings/public authority, as per detailed Scheme Plan and Zoning Regulations as approved by the Chandigarh Administration.
i) Already approved projects
For the projects which have already been approved by Chandigarh Administration, the norms already approved for the same shall be applicable there upon.
Violations of Rule 5/Compoundable Items:-
i) As per the Punjab Capital (Development and Regulation) Building Rules, 1952 if any change/alteration made by the owner at site during the course of construction these changes are permitted by paying the requisite fee under the provision of Rule 5 of above said Rule.
ii) The essential services required for the buildings such as over head water tanks, brick jalli, headway under staircase etc. made compoundable by the Chandigarh Administration at the time of granting the occupation certificate/sewer connection.
iii) The penalties for not obtaining the DPC certificate and illegal sewer connection has also been imposed by the Chandigarh Administration.
The description of the same is mentioned in annexure.
Need based changes in architectural controls
In Residential Buildings:
The unprecedented and unforeseen growth of population of the city, their growing affluence and changing lifestyles. The emergence of the town as a major trading and service provider city in the present liberalized socio economic scenario have exerted , tremendous pressure on the city’s vital infrastructure and the order of the built environment. Illegal construction through additional floors, coverage of balconies and courtyards which are essential for light and ventilation, construction beyond zoned areas, violation of frame controls are some of the major violations being witnessed. Taking cognizance of the situation, Chandigarh Administration has been undertaking periodic review to provide need based relief and address the genuine problems of the citizens.
In Commercial Buildings:
Chandigarh Administration has undertaken gradual and periodical review of various architectural controls to provide for more space. At the same time, an endeavour has been made to retain the architectural facades or make minimal external changes so that the street picture is preserved.